What is a strain gauge, and how does it work? 

When engineers need to understand how a component or structure responds to force, pressure or load, accurate measurement is essential. A strain gauge is a sensor that measures the tiny changes in an object’s shape when it is under stress. By converting those changes into an electrical signal, strain gauges provide the data behind product testing, design validation and structural monitoring. 

How does a strain gauge work? 

The most common type, the metallic foil strain gauge, consists of a fine metal foil pattern mounted on a thin, flexible backing. The gauge is bonded to the surface of the material being tested. When that material stretches, the foil stretches with it, becoming slightly longer and thinner, and its electrical resistance rises. When the material is compressed, resistance falls. 

The relationship between the change in resistance and the strain is described by the gauge factor. For typical metallic foil gauges, the gauge factor is around 2, which means the change in resistance is very small. To measure it accurately, strain gauges are usually connected in a Wheatstone bridge circuit, which converts the tiny resistance change into a measurable voltage. 

Bridges can use one active gauge (a quarter bridge), two (a half bridge) or four (a full bridge). Using more active gauges increases the output signal and can compensate for temperature effects, which is why full bridges are common in load cells and other transducers. 

Getting accurate results 

A strain gauge is only as good as its installation. The surface needs to be properly prepared and cleaned, and the adhesive and gauge must suit the material and operating conditions. Temperature changes can cause readings to drift, so many gauges are designed to be self-temperature-compensated for a particular material, such as steel or aluminium. Choosing the right gauge for the test material makes a significant difference to accuracy. 

Measuring strain in different directions 

Strain gauges come in different configurations. Single-axis gauges measure strain in one direction and suit applications where the direction of loading is known. Biaxial gauges measure in two directions, while rosettes, with three elements at set angles, let engineers work out the size and direction of principal strains when loading is complex. 

Specialist gauges are also available for composite materials, plastics, very small strains and extreme temperatures. 

Where strain gauges are used 

Structural engineering 

Bridges, buildings, dams and tunnels have to withstand changing loads throughout their life. Strain gauges help engineers monitor how structures behave, both during testing and in long-term structural health monitoring. Specialist versions are designed for embedding in concrete and for wet or waterproof applications. 

Automotive testing 

Vehicle components are exposed to vibration, impact and repeated loading. Strain gauges measure stress on chassis parts, suspension and other components during development, helping engineers find weak points and confirm designs perform as intended. 

Aerospace testing 

Aircraft structures need to be strong while staying as light as possible. Strain measurement shows how components respond to flight and ground loads. High-temperature gauges are available for engine and other demanding applications. 

Materials testing 

Engineers use strain gauges to study how metals, plastics and composites behave under tension, compression and fatigue loading. The data supports material selection, product development and research. 

Industrial machinery and transducers 

Strain gauges are also the sensing element inside many load cells, torque sensors and pressure transducers, and they are used to monitor loads and vibration in industrial machinery. 

Choosing the right strain gauge 

The right gauge depends on the material being tested, the expected strain range, the operating temperature, the space available and the environment. Gauge length, resistance and backing material all matter too. Options range from general-purpose foil gauges to composite-material, extended-temperature, waterproof and ultra-small gauges. 

Strain gauges from Sensors UK 

At Sensors UK, we supply Kyowa strain gauges for engineering, research and industrial applications. Our range includes general-purpose gauges, gauges for composites and plastics, extended-temperature gauges and ultra-small strain gauges. We have worked with Kyowa for more than 40 years, so we can help you choose a gauge suited to your material, environment and measurement requirements. 

Browse our strain gauge range or speak to our engineering team about your application.